1. La herramienta de prensado de la máquina de pelado debe elegir las mordazas cuando se usa, que coincide con el diámetro del alambre y la punta del alambre. Al presionar el alambre, simplemente presione el plano de las dos mordazas. Máquina terminal

 

2, el pelador de cables de la máquina peladora de cables de la computadora también debe elegir las mordazas correspondientes, las mordazas son demasiado grandes para despegar el cable, demasiado pequeño dañará la línea, la fuerza debe sobredimensionarse de manera uniforme y dañar fácilmente los alicates.

 

3. Si la llave de tubo es una llave de tubo de plástico, simplemente córtela en el tubo. Si el tubo se corta, el tubo se romperá. Si es una llave de tubo de acero, se cortará un poco hasta que se corte el tubo.

Stripping and tapping terminal refers to a machine used for wire processing. It can press the hardware head to the end of the wire. Then it can be turned on. The terminal that is punched out by the terminal machine is generally convenient for connection and does not need to be soldered. It is possible to securely connect the two wires together. It is only necessary to remove them when disassembling. Terminal machine

 

Stripping terminal machine

 

Machine characteristics

 

Generally, the cooperation presses the same speed, and the re-peeling and pressing are performed together once. After the traditional peeling action is completed, the pressing action is completed, saving time, greatly increasing the productivity, computer wires and cables, multi-core wires, etc. The pressing operation is fast and stable, and the current situation can be used to control the stability of the work.

 

1. Variable frequency control, complete silence, environmental protection and energy saving.

 

2. Small and concise small planning.

 

3, the adjustment of the stripping mechanism is concise, the stripping knife can do the correct fine-tuning adjustment, the precision is 0.01m/m per grid

 

4, can be stripped and pressed together with a variety of computer multi-core lines and terminals.

 

5. The dandruff is cleaned by the material returning equipment.

Why does the automatic terminal machine stop and eliminate the method instantaneously? In the case of the normal operation of the automatic terminal machine, there will be occasional momentary shutdown. How could a normally functioning machine stop suddenly? Just like our computer, it will be stuck in an instant. What is the matter?

 

In the case of general shutdown, we must first analyze the performance of the fully automatic terminal machine. Most of the reasons for the instantaneous shutdown may be caused by the compressed air being too low. We need to clear the fault, then set the total number and adjust it moderately. Pressure value, then restart the machine to see if it works. In addition to the air pressure, it is also possible that the counting amount of the fully automatic terminal machine exceeds the rated setting value, which requires us to reset the quantity value and then restart the machine.

 

First of all, there are many types and specifications of automatic dip soldering machines. Fully automatic dip soldering machines can be divided into: fully automatic double-head dip soldering machine, single-head twisting wire end dip soldering machine, fully automatic parallel wire dipping machine Tin machine, fully automatic head and end with tinned stranding machine. Crown can be customized according to customer needs. If there are special needs, it can process multiple lines at the same time. It can be equipped with parts such as wire feeding device, twisting device and tin furnace.

 

1. Fully automatic double-head dip tinning machine: It can realize the functions of cutting off at both ends of the wire, single-end stripping, double-end stripping, double-end stripping, double-end twisting, double-end dip tin and so on.

 

2, single-head twisted wire end dip tin machine: can achieve one end of the wire to the terminal, the other end twisted wire, stripping, dip tin and other functions.

 

3, fully automatic and line-end dip tin machine: specially designed for the single-end stripping of the cable, the other end of the stripping, stripping, dip tin, the front end can achieve peeling, semi-stripping and end function, the back end can be realized Peeling, semi-stripping and tinning function, all functions are digitally operated between computers. To replace the wire, just replace the split mold parts and terminal mold parts and terminal mold parts.

 

4. Fully automatic head-end dip tin stranding machine: For equipment with stranded wire demand, it can realize the integration of cutting, end and dip tin wire to improve production efficiency.

 

Second, the automatic dip soldering machine is selected according to the characteristics:

 

1. Fully automatic dip tin machine replaces manpower and saves cost. Increase productivity

 

2, automatic dip tin machine cut off the wire, stripping, dip tin and other actions related to the time will automatically adjust and adjust;

 

3, automatic dip tin machine production line range from AWG18 ---AWG34, very widely practical;

 

4. The twisting method adopts two jaw cutter clamping methods, which can adjust the clamping of the semi-stripping rubber to change the tightness of the twisting wire, so that the twisting wire is straight and beautiful;

 

5, the fully automatic dip tin machine is close to the 90 degree point of the tin, so that the wire diameter is averaged (the spot depth is accurate);

 

6. Fully automatic dip tin machine adjusts the height of the small tin cup by the rapid adjustment knob rotation mode, so that the depth of the spot is more accurate;

 

7, the design has a line gun barrel to advance, only to have the line function, the line is stable

 

8. The position of the fully automatic dip soldering machine can be adjusted to about 10mm.

 

9. The wire of the control wire is not easy to bend, and the position of the spot is more precise.

 

10. It is equipped with an automatic smoking device and a lead-free tin furnace to meet the high environmental standards (the tin furnace heating assembly uses a durable heating sheet instead of the traditional heating wire);

 

11. There is an automatic scraping device to make the cut wire bright and free of tin residue;

 

The fully automatic dip soldering machine has a high working environment and the interior needs to be kept clean and dry. Placed in a horizontal place, have a good stability. When processing, the fully automatic dip tinting machine will have a slight vibration. At this time, attention should be paid to safe operation. The staff should keep an appropriate distance from the machine. Also pay attention to the rest during the break and let the machine have an adaptation process.

 

1, can not peel

 

solution: 

Adjust the value of the stripping knife;

Check if the stripping optocoupler is normal.

The program is efficient: 90%.

 

2, the terminal machine can not start normally

 

solution:

Check if the stroke reaches the apex;

Is there any heavy object in the take-up slot?

The program is efficient: 100%.

 

3, the noise is very big

 

solution:

Wear occurs between a certain part and component of the terminal machine, resulting in increased friction;

When the terminal machine is loose during operation, the amplitude of the parts is increased.

The program is efficient: 100%.

 

4, the discharge folder can not hold the line

 

solution:

Increase the air pressure of the discharge clamp.

The program is efficient: 90%.

 

5, the end of the suction device does not work

 

solution:

Check if the half peeling parameter is greater than the length of the wire end in the case of half peeling at both ends.

The program is efficient: 100%.

 

6, the line deviation alarm

 

solution:

Check if the straightening wheel is too tight;

Check the encoder for damage.

The program is efficient: 90%.

 

7, the terminal machine appears to play

 

solution:

Check if the switch near the spindle of the terminal machine is damaged, or the screw is loose;

Check if the circuit board and pedal of the terminal machine are broken;

Check if the moving rod spring of the terminal machine is detached or broken and loses its elasticity, and the moving rod is damaged.

The program is efficient: 100%.