1, can not peel

 

solution: 

Adjust the value of the stripping knife;

Check if the stripping optocoupler is normal.

The program is efficient: 90%.

 

2, the terminal machine can not start normally

 

solution:

Check if the stroke reaches the apex;

Is there any heavy object in the take-up slot?

The program is efficient: 100%.

 

3, the noise is very big

 

solution:

Wear occurs between a certain part and component of the terminal machine, resulting in increased friction;

When the terminal machine is loose during operation, the amplitude of the parts is increased.

The program is efficient: 100%.

 

4, the discharge folder can not hold the line

 

solution:

Increase the air pressure of the discharge clamp.

The program is efficient: 90%.

 

5, the end of the suction device does not work

 

solution:

Check if the half peeling parameter is greater than the length of the wire end in the case of half peeling at both ends.

The program is efficient: 100%.

 

6, the line deviation alarm

 

solution:

Check if the straightening wheel is too tight;

Check the encoder for damage.

The program is efficient: 90%.

 

7, the terminal machine appears to play

 

solution:

Check if the switch near the spindle of the terminal machine is damaged, or the screw is loose;

Check if the circuit board and pedal of the terminal machine are broken;

Check if the moving rod spring of the terminal machine is detached or broken and loses its elasticity, and the moving rod is damaged.

The program is efficient: 100%.