Many customers who use the terminal crimping machine feedback have such a situation that the terminal pressing opportunity has a problem of moisture. Indeed, sometimes because the outside air is wet and cold, or because the indoor is relatively cold and wet, causing the terminal crimping machine to appear wet, then how to solve the moisture problem of the terminal crimping machine?

1. Use the air conditioning dehumidification function to solve the damp problem. Most air conditioners today have this feature. The operation of dehumidifying the air conditioner can effectively deal with the problem of humidity in the room during the rainy period, and can also form an all-round protection for the terminal crimping machine.

 

2. When the terminal crimping machine in the factory is not used, it is better to make a protective cover, which can effectively avoid the humid gas on the back of the terminal crimping machine. At the same time, you can increase the frequency of using these appliances, because the machine generates heat when it operates, so that it can properly remove moisture. If the computer does not display due to wet and cold, you can turn on the power, usually 10 minutes up and down the computer display can work again.

 

3. Analysis is for what causes the terminal crimping machine to be wet. If the external gas is too cold, remember to close the door and close the window; if the room is too wet and cold, to ensure the air circulation in the room, you can use air conditioning, fan to dehumidify.

 

4. For long-term wet and cold areas, you can use the built-in carbon in the house or the bamboo carbon under the floor tiles in the room. It has a very good effect on the balance of humidity in the house and the prevention of dust mites and gas cleaning. Usually the most suitable floor covering the carton

 

5. Put some quicklime (mixed with sand) in the damp dead corner, which can effectively improve the humidity problem of the terminal crimping machine.