When we use the terminal machine for the first time, we must remember that we must not start it ourselves. We must let experienced employees conduct guided operations and strictly prohibit the unintelligible personnel from operating the terminal machine. In addition, when we use the terminal machine for the first time, we must familiarize ourselves with the instructions for using the terminal machine. Because we are familiar with it, we can know the specific procedures for the use of the terminal machine.

 

In addition, when we use the terminal machine, we must install the knife by the designated personnel. Before loading the knife, we must manually compare the selected blades. If the comparison is correct, the knife can be installed. After the tool is completed, the hand test needs to be used. . At this time, we must first turn off the power of the terminal machine, press the touch button, use the special wrench to shake the main driven wheel, so that the terminal machine press stroke to the maximum, if the hand does not move, consider whether the pressure is too large or other problems, Check debug to OK. Before each operation, check each locking screw and confirm that it is not loose.

 

When the terminal machine replaces the terminal, the power must be disconnected before the replacement is performed. It is strictly forbidden to replace it during the operation of the machine.

 

Finally, after the production is completed, the good products and waste products are sorted out, and the environmental sanitation around the machine is cleaned. It is guaranteed that the next time the terminal machine is used, it will not cause a safety accident due to the residual of the scrap.