Automatic terminal machine is a new equipment in recent years. It has a multi-function machine, feeding, cutting, multi-functional machine stripping and crimping together, humanized and intelligent high-end technology products, which are suitable for large, medium and small enterprises. , saving labor. In order to extend the life of the fully automatic terminal machine, we need to maintain it daily.

 

The automatic terminal machine is capable of cutting, stripping and crimping the wires. It has similar functions to the computer stripping machine, and has the functions of peeling and pressing detection. There are mechanical terminal machines in the market (mostly domestic) And computerized terminal machines (joint ventures and imports). Mechanical is a measure of mechanical transmission, stability and precision. The computer type uses track motion and runs with a servo motor, which is excellent in stability and accuracy.

 

During the processing of the terminal machine, there may be a situation of poor contact. Of course, the metal conductors in the contact of the entire terminal machine are all the main core components, and they are mainly from external power sources or cables. The voltage, current, or signal is transmitted to the surface of the connector that matches them to make the relevant processing contact. It is necessary to have more optimized structures. Only in this way can the operation be more stable and reliable, and they must be good. The electrical conductivity, so if the structural design of the contact is unreasonable, or the material selection is wrong, then basically the entire contact parts will have some poor contact.

 

The use of the tool is crucial in the production process using the terminal machine. The vibration of the tool during the cutting process is mainly manifested in the case where the length is long and the workpiece is fine. In the process of high-speed cutting, a large amount of noise is generated, which also causes harm to the human body. Correct and rational use of such a fully automatic terminal device can greatly reduce noise and reduce vibration.

 

The vibration of the automatic terminal machine can be divided into three modes: high frequency vibration, medium frequency vibration and low frequency vibration. There are many ways to reduce the vibration, such as using sharp tools and 90 degree tools for slender workpieces. Angle to cut, adjust the specific parameters of the cutting, and rationally arrange the process path of the cutting.