1. Mold height scheduling: Loosen the punch compression screw and use a small round rod to change the dispatching screw (six aliquots on the circumference), clockwise up and counterclockwise down (0.25 mm per aliquot) ), adjust the punch to the proper orientation, and then tighten the punch to tighten the screw (that is, arrange the core crimp height).

 

2. The upper inner knife and the upper outer knife fall the difference scheduling: PVC pressing height micro-distribution, loosening the upper knife pressing screw, pulling out the rotation, from 1-8 a total of 8 guidelines, the larger the number, the higher the PVC blade height, each The height of the policy differs by 0.1 mm. Adjust to the appropriate position (ie, schedule the line crimp height).

 

3. Some scheduling of feeding: press the up and down keys to move the slider to the highest point, loosen the feeding rod fixing seat pressing screw, rotate the feeding scheduling screw (clockwise backward, counterclockwise forward), and send the terminal to the blade center. Scheduling the slider to the proper orientation is scheduled.

 

4. When the mute terminal machine starts the power switch, it is necessary to disengage the wrench.

 

5. It is necessary to adjust to the highest point before starting the punch.

 

6. Prevent several terminals from being pressed.

 

7. Admit that the voltage is normal (please install a voltage regulator) to ensure the service life of the machine.

 

8. For your safety, make sure your hands are off the machine to start the power operation.

 

9. When the operator adjusts the mold, it is necessary to make the machine in manual condition (ie the indicator light is red).