The terminal machine refers to a machine used for wire processing. It can press the hardware head to the wire end and then conduct it. The terminals that are driven out by the terminal machine are usually more convenient for connection. The two wires can be stably connected without soldering, and only need to be unplugged when disassembling.

 

The automatic terminal machine is a new equipment in recent years. It has a multi-functional machine, feeding, cutting, multi-functional machine stripping and crimping together, humanized and intelligent high-end technology products, which are suitable for large, medium and small. Enterprise, saving labor. In order to extend the life of the fully automatic terminal machine, we need to maintain it daily.

 

 The fully automatic terminal machine is capable of cutting, stripping and pressing the terminal. It has similar functions to the computer stripping machine, and has the function of peeling and pressing detection. There are mechanical terminal machines in the market (many are domestically produced). ) and computerized terminal machines (joint ventures and imports). The mechanical type is mechanically driven, and the stability and accuracy have certain dimensions. The computer type uses track and rail motion and runs with a servo motor. The stability and accuracy are excellent.

 

 The guide rails of the fully automatic terminal punching machine must have a lubricating oil hole at the top of each terminal for 1 hour, and generally 2-3 drops are suitable. In addition, the surface of the fully automatic terminal machine must be cleaned daily and excess grease. The main high-speed bearing terminals must be greased weekly. After using the fully automatic terminal machine after 3-6 months, it is necessary to check whether all parts (loss) need to be replaced with accessories such as belts, whether the mechanical locking screws are loose, and whether the spring is deformed.

 

 Breaking the traditional meaning of automatic maneuvering workflow layout, the line cutting, peeling, end, and twist line height are combined in a straight line. Since the various operating mechanisms are integrated in a straight line, the production time of a single electronic wire is reduced, and the production capacity is surprisingly several times higher than that of the conventional model.