How to effectively reduce the risk of operating the terminal machine?

Safety First has always been the aim of every production and processing enterprise. As a manufacturer of terminal machines, what should we pay attention to when operating terminal machines to reduce the risk of operation?

 

First of all, for the first time using the terminal machine, the machine must be operated under the guidance of experienced personnel. It is strictly forbidden to operate the terminal machine without the operator. For the first time using the terminal machine, be sure to read the instructions for the terminal machine. Be familiar with the specific procedures for the use of terminal machines.

 

Terminal machine

 

The terminal machine is loaded by the designated personnel. Before the tool is loaded, it must be manually compared with the selected blade. The tool can be loaded after the comparison is correct. After the tool is completed, the hand test must be used. First, turn off the power of the terminal machine and press the touch button. Use the special wrench to shake the main driven wheel to make the terminal machine press stroke to the maximum. If the hand is not moving, consider whether the pressure is too large or other problems, check and debug to OK. Before each operation, check each locking screw and confirm that it is not loose.

 

When the terminal machine replaces the terminal, the power must be disconnected before the replacement is performed. It is strictly forbidden to replace it during the operation of the machine.

 

After the final production, the good products and waste products are sorted out, and the environmental sanitation around the machine is cleaned. It is guaranteed that the next time the terminal machine is used, it will not cause a safety accident due to the residual of the scrap.

 

As a machine used for wire processing, the terminal machine is very important in the power industry. The terminal machine can press the hardware head to the wire end, and then make the line conduction. The terminal that is driven out by the terminal machine is usually convenient for connecting the wires. The welding can stably connect the two wires together, and only need to be unplugged when disassembling. It greatly facilitates our use and reduces unnecessary waste. The terminal machine should be used with great care to avoid unnecessary damage.

 

The above is about the terminal machine related content, I hope everyone pays more attention to, safety first is always our aim.