Everyone knows that wire processing harnesses are generally made up of terminals or connectors at both ends. The meaning of harness assembly is for electrical conduction. One of the basic elements of the terminal is not available. Otherwise, the current cannot be circulated normally. Nowadays, three key points that must be paid attention to when introducing the crimping terminal of the terminal machine are introduced.

The terminal machine manufacturer reminds you that the three elements of the fully automatic terminal crimping terminal are: the relationship between the wire and the terminal block:

1. The applicable specifications of the wire diameter and the terminal block are the same.

2. The length of the conductor crimping portion and the wire stripping specification are the same.

3. Whether the core wire at the stripping point is damaged or broken, if there is a disconnection condition, follow the instructions of the superior.

4. When the terminal is pressed, the height of the conductor is within the tolerance of the indicated value and is pressed in the middle of the indicated value.

5. There is no core flying wire between the insulator crimping portion and the conductor crimping portion.

6. The bell mouth is on both sides, if it is on one side, it must be on the insulation side.