1. Mould height scheduling: Loosen the punch pressing screw and change the dispatching screw with a small round rod (there are six equally divided holes on the circumference), clockwise up and counterclockwise down (every change of one aliquot is 0.25 mm), adjust the punch to the proper orientation, and then tighten the punch to tighten the screw (ie, arrange the core crimp height).

2, the upper inner knife and the upper outer knife drop scheduling: PVC pressing height micro-scheduling, loosening the upper knife pressing screw, pull out the rotation, from 1-8 a total of 8 guidelines, the higher the number, the lower the PVC blade height, Each policy has a height difference of 0.1mm. Adjust to the appropriate position (ie, schedule the line crimp height).

 

3. Some scheduling of feeding: press the up and down keys to move the slider to the highest point, loosen the feeding rod fixing seat compression screw, rotate the feeding scheduling screw (clockwise backward, counterclockwise forward), and send the terminal to the blade center. . Scheduling the slider to the proper orientation, that is, the scheduling ends.

 

4. When the mute terminal machine starts the power switch, the wrench needs to be disengaged.

 

5. It is necessary to adjust to the highest point before starting the punch.

 

6. Avoid pressing several terminals.

 

7. Whether the voltage can be normal (please install a voltage regulator) to ensure the service life of the machine.

 

8. For safety reasons, ensure that the hands are off the machine before starting the power operation.

 

9. When the operator adjusts the mold, it is necessary to make the machine in manual condition (ie the indicator light is red).