1. The wire penetrates from the inlet, passes through the inlet wheel, and passes through the conduit on the edge;

 

2, the inlet wheel gap conditioning, through the "incoming wheel gap conditioning wheel" conditioning two rounds of gap is smaller than the outer diameter of the strip to be stripped, and to ensure normal stripping;

 

3, the outlet wheel clearance conditioning: through the "outer wheel gap conditioning wheel" conditioning to the two-wheel gap is smaller than the outer diameter of the strip to be stripped, and conditioning the disconnection indicator light in the critical state of light and off, then turn a half turn in the big direction If the wire is still knotted and stopped, then turn the gap down a little.

 

Second, safety application notes:

 

In order to ensure that you can use the computer wire stripper safely and correctly, please read this instruction manual before using it.

 

1. In order to stabilize the working voltage of the machine, please choose the power supply regulator to avoid the voltage is too high and burn the machine.

 

2. When using the machine, the machine should be placed on a flat and stable surface to avoid falling damage to the machine.

 

3. Do not use the machine in an area close to the electromagnetic field to avoid interference with the machine.

 

4. Do not place any objects on the machine during use. Do not approach corrosive chemicals. It must be dry, ventilated and dust-free. The room temperature is 0–35 °C.

 

5. If the machine exhibits unsatisfactory stripping effect or different degrees of problems during use, please read the faults and troubleshooting methods in this instruction manual. If you still can’t solve it, please call our technical service telephone for consultation and repair. For your safety, do not disassemble the machine for inspection.